Email: [email protected]
Hotline: 0086-371-86151827
The company was established in 2000, covering an area of more than 4,500 acres It has fixed assets of 200 million yuan, and employs more than 1,200 people It has now formed coking, sintering, white ash, pellets, ironmaking, steelmaking, steel rolling, oxygen production, gas and waste heat The complete circular economy industrial chain including power generation, comprehensive utilization of slag, soot and dust treatment, sewage treatment and recycling, etc It mainly produces hot-rolled steel plates and carbon structural steels, high-quality carbon structural steels, low-alloy high-strength steels, medium and wide-band steels for cold-rolled stamping, and hot-rolled coils,6mm FB2 bulletproof steel.
The technical conditions are applicable to the high-strength A514Gr. Q alloy steel plate with thickness of 80-152mm. , A514Gr Q high yield Strength Quenched and tempered alloy steel plate suitable for the rack of construction machinery and jack up offshore drilling platform Available steel plate specifications range: thickness 8-650mm, width 1500-4020mm, length 4000mm-17000mm Our company can supply alloy steel plates every month 500tons,6mm FB2 bulletproof steel.
6mm FB2 bulletproof steel,Low-alloy steel plates have low carbon content, and because ferrosilicon is not used for deoxidation, the silicon content in steel is often <0.07%. The outer layer of rimmed steel is crystallized in a rimmed state, so the surface layer is pure and dense, the surface quality is good, and the Zhengzhou low alloy steel plate has good processing performance. Rimmed steel does not have large concentrated shrinkage cavities, uses less deoxidizer, and the cost of steel is low.
6mm FB2 bulletproof steel,we also provide the welding service for customers, and our welding method, hand arc welding, submerged arc welding and tungsten argon arc welding, melting polar gas shielded welding and so on. And we have lots of successful welding project, such as longitudinal submerged arc welding pipe, welding cross colume, prestressed truss and welding box colume.
6mm FB2 bulletproof steel,According to GBT3077, 42CrMo steel chemical composition should be within the range (%): 42CrMo carbon content is 0.38-0.45 (C), Silicon content is 0.17-0.37 (Si), Manganese content is 0.50-0.80 (Mn), Chrome content is 0.90-1.20 (Cr), Molybdenum content is 0.15-0.25 (Mo). The high Cr content contrivutes to high strength of 42CrMo steel, with min. yield strength of 930 Mpa, and min. tensile strength of 1080 Mpa. The common heat treatment for 42CrMo steel is quenching and tempering.6mm FB2 bulletproof steel
The after-sales service personnel understand the user's ideas and needs in detail, and stand on the other side's position and interests. Actively communicate with users and help them solve practical problems. This not only solves the service problem, but also improves the customer's trust in the company.6mm FB2 bulletproof steel
Pre:EN1522 FB5 class armor steel plate price is expected to reach peak in the third quarter
Threat STANAG 4569 1 class (Infantry Rifles, 5.56/7.62 Ball) Artillery Simulator: 20mm FSP (simulating 155mm threat) at 520 m/sec from a distance of 100 meters (7,273J). Due to very low probability of a large fragment retaining enough velocity at these d
More
This NIJ 0108 Ⅳ class standard is applicable to all ballistic resistant materials (armor) intended to provide protection against gunfire, with the exception of police body armor and ballistic helmets, which are the topic of individual NIJ performance stan
More
This NIJ 0108 Ⅲ class standard is applicable to all ballistic resistant materials (armor) intended to provide protection against gunfire, with the exception of police body armor and ballistic helmets, which are the topic of individual NIJ performance stan
More
EN 1063 standard applies to attack by handguns, rifles and shotguns and glazing in buildings for interior and exterior use: Handgun classes are EN 1063 BR2, EN 1063 BR3 and EN 1063 BR4, Rifle specifications are EN 1063 BR1, EN 1063 BR5, EN 1063 BR6 and EN
More
EN 1063 BR6 class is a safety glass standard established by the European Commission to measure the protective strength of bulletproof glass. EN 1063 BR6 class is usually used in conjunction with EN 1522 (standard for the resistance of windows, doors, shut
More
EN 1063, also known as CEN 1063, EN1063 BR5 class is a safety glass standard established by the European Commission to measure the protective strength of bulletproof glass. EN1063 BR5 class is usually used in conjunction with en 1522 (standard for the res
More
Ramor 600 is an ultra-high hardness bulletproof steel, which can provide 3-6 mm (0.118-0.236 ") thick plates with a nominal hardness of 600 HBW. Ramor 600 is available in 3-6 mm (0.118-0.236 ") thick, delivered in quenched condition without further heat
More
Ramor 550 steel is an ultra-high hardness bulletproof steel, which can provide 3-15 mm (0.118-0.591 ") thick plates with delivery hardness of 540-600 HBW. Ramor 550 steel is available in 3-6 mm (0.118-0.236 ") thick plates and 6-15 mm (0.236-0.591") th
More
Ramor 500 is a high hardness bulletproof steel, which can provide plate thickness of 2-30 mm (0.079-1.18 ") and deliver hardness of 490-560 HBW. Ramor 500 is available in 2-6.5 mm (0.079-0.256 ") thick plates and 6-30 mm (0.236-1.18") thick plates. Ram
More
Ramor 450 steel is a medium hardness bulletproof steel, which has both bulletproof function and impact toughness. Ramor 450 steel is available in 8-16 mm (0.315-0.630 ") thick plates with delivered hardness of 400-480 HBW. Ramor 450 steel does not requir
More
The anti explosion steel Ramor 400 is an explosion-proof medium hardness steel, which can provide plate thickness of 2-30 mm (0.078-1.18 ") and the delivered hardness is 360-460 HBW. Ramor 400 can provide 2-12 mm (0.078-0.472 ") thickness fixed length s
More
The Ramor 300 is a low alloy bulletproof steel plate that provides 3-6 mm (0.118-0.236") sheet with a hardness of 260-320 HBW. The Ramor 300 does not require further heat treatment. Ramor 300 size range: 3.0-6.0mm thickness of open cutting sheet.
More
The EN1522 FB7 class/ BR7 window detailed on this page below is specifically tested to EN 1063 BR7 and EN1522 FB7 class, withstanding multiple impacts from a 7.62 x 51 calibre weapon, a Rifle (AP). As you can see from the table below there are many compar
More
Our company manufacture EN 1522 FB5, EN1522 FB6 class and EN 1063 BR5 and BR6 Ballistic Windows to suit your specific requirements. Our Bullet Windows have been independently tested and certified within the UK to both EN1522 FB5 and EN1522 FB6 class with
More
Since the end of 1998, the new Euro Standard EN1522 FB5 class has been applied Europe-wide and replaces all standards that have been valid in these countries so far. The EN1522 FB5 class applies to all bulletproof doors, windows, shutters, transfer trays
More
Weldability of BP600 bulletproof steel plate: the carbon equivalent of BP600 bulletproof steel plate is between 0.50 and 0.62, which indicates that the steel has good weldability. The BP600 bulletproof steel plate heat input during welding is about 1.5-2.
More
Weldability of BP500 bulletproof steel plate: the carbon equivalent of BP500 bulletproof steel plate is between 0.50 and 0.62, which indicates that the steel has good weldability. The BP500 bulletproof steel plate heat input during welding is about 1.5-2.
More
The BP440 steel sheet can be heat treated. It has excellent gun resistance, strong impact resistance, uniform and stable performance, good shape and surface quality. This BP440 steel sheet is suitable for cash carriers, armored personnel carriers, escort
More
BP370 steel plate is heat treated with hot rolled coil as base plate. BP370 steel has excellent gun resistance, strong destructive impact resistance, uniform and stable performance, good shape and surface quality.
More
BP370 steel plate is heat treated with hot rolled coil as base plate. BP370 steel has excellent gun resistance, strong destructive impact resistance, uniform and stable performance, good shape and surface quality.
More