Alloy seamless steel pipe ballistic property of Ramor 300 plate

The company now has ballistic property of Ramor 300 plate oversea market department, sales and supply department, finance department, logistics department, technical equipment department, quality management department, production department and other departments. The staff with college degree or above accounted for more than 80%, and there were more than ballistic property of Ramor 300 plate 30 professional and technical personnel. The LSAW pipe production line can produce welded pipes with Φ350-1800mm, wall thickness 6-80mm, and length 2-12m.

Carbon steel ballistic property of Ramor 300 plate is an iron carbon alloy with carbon content less than 2.11% and a small amount of silicon, manganese, sulfur, phosphorus and other impurities. Carbon steel inevitably contains some impurity elements during smelting, which has a great influence on the performance and quality of steel, so it should be controlled. The quality of carbon steel is mainly measured by the content of sulfur and phosphorus. The lower the ballistic property of Ramor 300 plate content of sulfur and phosphorus, the better the quality of carbon steel.

Special boiler steel is derived from carbon structural steel, ballistic property of Ramor 300 plate. The expression of boiler steel grade is similar to that of high-quality carbon structural steel, and the carbon content is usually 0.20%. The chemical composition of boiler steel is basically the same as that of high-quality carbon structural steel of the same brand, but the mechanical properties are strictly required, especially the impact toughness, and the aging sensitivity is required to be small. After deoxidation and removal of non-metallic inclusions, boiler steel has a uniform structure, the grain size is controlled at 3-7 grade, and the defects such as interlayer, shrinkage, porosity and porosity are relatively less.

Both steelmaking and ironmaking are carried out by oxidation-reduction reaction, but there are great differences between them in reaction objects: ironmaking is to reduce iron, while ballistic property of Ramor 300 plate steelmaking is to remove excessive carbon and other impurities in pig iron, so there are relations and differences between them in actual operation. There are three main methods of ballistic property of Ramor 300 plate steelmaking: converter, electric furnace and flat furnace. The converter steelmaking process is most widely used.

Boiler steel ballistic property of Ramor 300 plate inventory: 14*2000*11181, 14*2070*9060, 14*2200*10030, 15*2200*10270, 15*2500*10000, 15*2992*10185, 16*1500*9340, 16*1800*6000, 16*2000*10713, 16*2120*6080, 16*2230*7650, 18.5*2320*6600, 20*1400*11400, 20*2100*7000, 20*2933*7300, 20*3200*4400, 20.9*2851*7000, 21*2100*8810, 21.5*1630*13480.

In addition to quality assurance, service is also important for the competition of steel suppliers. All the after-sales service personnel of the company have received professional training and assessment. The steel products supplied by our company enjoy the life-long quality problem replacement service. In the process of using our steel ballistic property of Ramor 300 plate products, if there is any problem, just contact us in time, and our after-sales service personnel will look for countermeasures and solve the problem with you as soon as possible.

Pre:Prime quality fast delivery yield strength of Ramor 300 price per ton

NextRamor 300 steel thickness range price is expected to reach peak in the third quarter