Do you know the ballistic property of Ramor 300 plateyield strength?

Ballistic property of Ramor 300 plate,We are a professional steel raw material supplier with a history of 17 years. After years of development, the company's steel plates and coils are widely used in construction, machinery manufacturing, container manufacturing, shipbuilding, bridge construction and other fields around the world. With good product quality, we have solid project cooperation with foreign governments or leading enterprises such as Egypt, Bangladesh, Myanmar, Thailand, Philippines, Vietnam, Venezuela, Peru, Mexico, the United States, Portugal, Russia, Iran, Iraq, Pakistan, etc.

15Mo3 steel is a kind of pearlitic heat-resistant steel, which can still show its characteristics under high temperature and long time load. 15Mo3 steel is used for heating surface of ballistic property of Ramor 300 plate low and medium pressure boiler (working pressure is generally not more than 588MPA, and working temperature is below 450 ℃) 15Mo3 steel is widely used in petroleum, chemical industry, power station, boiler and other industries 15Mo3 steel is used to make reactor, heat exchanger, separator, spherical tank, oil and gas tank, liquefied gas tank, etc,ballistic property of Ramor 300 plate.

Ballistic property of Ramor 300 plate,Grades , Q345 (16Mn) and Q390 steel have good comprehensive mechanical properties, good welding performance, cold and hot workability and corrosion resistance C, D, E grade steel has good low temperature toughness Mainly used for ships, boilers, pressure vessels, petroleum storage tanks, bridges, power station equipment, lifting and transportation machinery and other higher-load welding structural parts,ballistic property of Ramor 300 plate.

S355J2 steel plate rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the rolling speed is 1.6-2.0m/s, the single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.As a basic building material, steel plates are currently widely used in automobiles, shipbuilding, chemical industry, aerospace and other fields. Reasonable selection of flaw detection methods to ensure the quality of steel plates is of great significance to safe production. Common defects of steel plates are folding, inclusion, shrinkage, air bubbles, delamination and cracks. These problems can be discovered in time through flaw detection.ballistic property of Ramor 300 plate

"We can supply hot rolled pressure vessel plate available sizeThickness from 5mm to 150mm Width: from 1,500mm to 2,500mm Length: from 6,000mm to 12,000mmFor plates thinner than 40mm normally supply as rolled. Plates above 40mm thick are normalised.Technical conditions: Ultrasonic tested as per SA 578 or any other as per requirement ; MTC acc to EN 10204 / 3.2; Charpy Impact tested at -20/-46 DegC.; Furnace Normalised."

Respect customers and treat each other sincerely. Customers are always right. Always remember that the user is the God of the enterprise, respect the customer, and accept the customer's opinion modestly is the guarantee of the long-term development of the enterprise. Adhere to this concept, so that the service and the product are the same, long-term.ballistic property of Ramor 300 plate

Pre:yield strength of Ramor 300 carbon steel plate grade

NextRamor 300 steel thickness range main useage