Ramor 300 bulletproof steel properties and features

We are world class steel materials supplier We are engaed in providing raw steel materials such as steel plates / steel coils / steel sheets / steel pipes, deep processing and a series project design and solutions to clients We guarantee to return goods for free for quality problem during its lifetime Your satisfactory is our permanent pursue We always welcome advise from clients to make self-improvement continously And sincerely to build long-term cooperation with you,Ramor 300 bulletproof steel.

According to the European standard EN10025-3:2004, S275NL weldable fine grain structural steel is mainly used to manufacture the plants of factory, the common construction and construction machinery and equipment. For the bound technical terms,steel plate S275NL have to be done low temperature impacting test in rolling process at -50℃ with minimum energy 27J. Other additional requirements such as UT shall be according to EN 10160, and , steel plate S275NL customers can choose the relative classes for Ultrasonic test,Ramor 300 bulletproof steel.

Ramor 300 bulletproof steel,The main characteristics of , 12Cr1MoV alloy steel plate are as follows:Compared with 12CrMoV steel, 12Cr1MoV alloy steel plate has higher oxidation resistance and thermal strength The creep limit of 12Cr1MoV steel is close to the stress rupture strength, and it has high plasticity under the condition of long-term tension The process and weldability of 12Cr1MoV steel are good, but it needs to be preheated to 300 ℃ before welding, and stress relief treatment is required after welding,Ramor 300 bulletproof steel.

The hot rolling method is to heat the steel material to about 1000 ℃ ~ 1250 ℃ and use the rolling mill to roll it. The traditional hot rolling process is generally divided into the following two steps: the first step is to use the primary rolling mill or billet rolling mill to roll the ingot, billet or continuous casting billet into a certain shape and size of billet. This kind of rolling process is usually called semi-finished product production, also called blank production.Ramor 300 bulletproof steel

GB standard wear resistant steel plates parameters: The standard for Chinese wear plates is GB/T 24186, which includes NM400, NM450, NM500, NM550, NM600 etc. steel grades. According to the standard, the NM400 plate thickness is no more than 80mm, and hardness is 370-430HBW. NM450 plate thickness is no more than 80mm, and hardness is 420-480HBW. NM500 plate thickness is no more than 70mm, and hardness is 470HBW min. And NM600 plate thickness is no more than 60mm, and hardness is 570HBW min.

Ramor 300 bulletproof steel,The company strengthens process management and pays attention to assessment. One of the key points of good service is to strengthen the process management and improve the evaluation mechanism. Make the after-sales service system more perfect and provide better service for customers.Ramor 300 bulletproof steel

Pre:10 mm thickness hot rolled bulletproof Ramor 300 plate properties

NextHot Sell Ramor 300 steel plate for helmet Alloy Steel