What is B900FD bulletproof use for strong box steel grade

Standing at a new historical starting point, we adapt to the requirements of supply side B900FD bulletproof use for strong box structural reform, adhere to the overall strategy of "innovation driven, quality leading, quality improving and efficiency increasing, transformation and development", and constantly improve the development concept and development level with a forward-looking vision and grand vision. Now we have been ranked the International leading B900FD bulletproof use for strong box steel materials supplier.

14Cr1MoR steel plate is suitable for petrochemical, nuclear power, steam turbine cylinder block, thermal power and other high-temperature and high-pressure large-scale equipment that is connected to hydrogen or hydrogen mixed media.Chemical element composition of B900FD bulletproof use for strong box container plate:C: 0.05%-0.17%Si: 0.50%-0.80%Mn: 0.40%-0.65%P: 0.010%-0.012%Cr: 1%-1.5%Mo: 0.45%-0.65%Ni: 0.20%-0.25%

There is no weld on the outer surface of seamless steel pipe, which is the change from round steel progressive perforation to hollow round bar, with good compression resistance. According to different materials, the processed finished products B900FD bulletproof use for strong box are applicable to a wide range of fields (for example: machine gearbox gears, gear wheel axles, cams, worms, piston pins, claw clutches, high-pressure pipes and various fasteners, high-grade carburized parts, such as gears, shafts, etc.) in the medium containing nitrogen hydrogen mixture for fluid transmission. It can improve the utilization of materials.

B900FD bulletproof use for strong box, Hardened wear-resistant plates are gradually annealed at a temperature higher than 250℃ to lose their hardness, which greatly reduces the wear resistance. The welding process will also reduce the hardness near the weld; the wear layer of the bimetal wear plate is of high alloy composition, and there is a secondary hardening effect at a certain temperature, and it can generally work below 650℃.

"We can supply B900FD bulletproof use for strong box, hot rolled pressure vessel plate available sizeThickness from 5mm to 150mm Width: from 1,500mm to 2,500mm Length: from 6,000mm to 12,000mmFor plates thinner than 40mm normally supply as rolled. Plates above 40mm thick are normalised.Technical conditions: Ultrasonic tested as per SA 578 or any other as per requirement ; MTC acc to EN 10204 / 3.2; Charpy Impact tested at -20/-46 DegC.; Furnace Normalised."

If you are in the search of best quality of B900FD bulletproof use for strong box structural steel plate then you have landed on the right place. These high quality structural steel plates are used for a long time as they have a long life due to their best and advance manufacturing techniques. These B900FD bulletproof use for strong box plates are best and ideal for temperature rise work, high pressure and tank fabrication work where accurate & excellent toughness is required for better results. Welcome to our factory. We supply our products to all the leading industries and customers who are satisfied with our production and quality.

Our company will accept the product quality objection registration record, pass it to the B900FD bulletproof use for strong box production unit and relevant departments, and timely coordinate the supervision of product B900FD bulletproof use for strong box quality objection. Our company coordinates the relevant department personnel to the customer unit to carry on the investigation, the processing.

Pre:What is the available size of B900FD bulletproof armored car?

NextWhat is the B900FD bulletproof used for safety gate price export to Morocco