Email: [email protected]
Hotline: 0086-371-86151827
The company adheres to the EN1522 FB6 steel main application business tenet of "integrity casting strength, cooperation creating win-win", takes value-added service of supply chain as the tenet, and under the premise of existing market, bulk trade, logistics distribution and other advantages, develops a new comprehensive steel industry model combined with informatization. And will continue to provide customers with high-quality steel products and good service. We sincerely welcome new and old customers to join hands with our company EN1522 FB6 steel main application and seek common development!
The company has strict control on the quality of EN1522 FB6 steel main application. Each EN1522 FB6 steel main application is inspected for the whole process, including raw material purchase, production process according to the procedures and relevant regulations. According to the technical standards and technical requirements, the composite quality inspection is carried out to confirm whether the EN1522 FB6 steel main application meets the specified quality requirements. If the EN1522 FB6 steel main application does not meet the quality requirements, the non conformity control shall be implemented, and the unqualified EN1522 FB6 steel main application shall be removed, marked, registered and effectively isolated; the EN1522 FB6 steel main application shall be inspected and confirmed for acceptance, release and delivery, and the quality certificate shall be issued.
The yield strength of Q690D steel plate is 690 Mpa and the impact temperature is - 20℃. EN1522 FB6 steel main application, Q690D steel plate has high strength, good plasticity and toughness, good weldability and good cold and hot performance. Q690D steel plate is mainly used to manufacture various large engineering structural components and construction machinery. Because of its high strength and good toughness, Q690D steel plate can reduce the self weight of components and meet the requirements of large-scale and lightweight engineering components and equipment under the condition of ensuring strength, stiffness and reliability.
For wear-resistant steel plate, it is not the higher the hardness, the better the wear resistance! Hardness is the basis of excellent wear resistance of EN1522 FB6 steel main application, wear-resistant steel plate, but the relationship between hardness and wear resistance is not in direct proportion. The reason why wear-resistant steel plates are wear-resistant is that they have hard particles and soft matrix. Generally, in the process of wear, there will be some falling substances, which will be incorporated into the soft matrix and will not cause great damage to the surface.
StE 480.7 TM steel plate/pipes,under DIN 17172 standard, we can regard StE 480.7 TM steel plate/pipes as large diameter pipes. EN1522 FB6 steel main application, StE 480.7 TM steel plate/pipes is one mainly of Steel for large diameter pipes,DIN 17172 StE 480.7 TM steel with the demands in mechanical properties of the pipes followed the DIN 17172 specification for grade StE 480.7 TM(YS is 485MPa, TS is from 600-750 MPa).It is well known that a low carbon bainitic microstructure offers an excellent combination of strength and toughness.
We are experienced shipbuilding and marine grade steel materials supplier and exporter with more than 20 years experience. For any question about the EN1522 FB6 steel main application shipbuilding steel materials, such as shipbuilding steel price, ABS EH36 steel specification, Lloyds grade A steel properties, AH36 steel mechanical properties, AH32 steel price, DH32 steel dimensions, difference between EH36 and DH 36 etc., please feel free to consult us.
Customer first, reputation first, high-quality and perfect after-sales service is the extension of our product value and an important guarantee for the interests of customers. The purpose of our EN1522 FB6 steel main application service quality management system is to establish and constantly improve a scientific, reasonable and efficient service quality management system, and complete the after-sales service quality guarantee work of customers fairly, accurately and timely, For our company's EN1522 FB6 steel main application customer service to establish a good, comprehensive, full service system.
Pre:What is the top ten suppliers of EN1522 FB6 plate used for safety gate in Nigeria
NextWhat are the precautions during the cutting of EN1522 FB6 steel specification
Threat STANAG 4569 1 class (Infantry Rifles, 5.56/7.62 Ball) Artillery Simulator: 20mm FSP (simulating 155mm threat) at 520 m/sec from a distance of 100 meters (7,273J). Due to very low probability of a large fragment retaining enough velocity at these d
More
This NIJ 0108 Ⅳ class standard is applicable to all ballistic resistant materials (armor) intended to provide protection against gunfire, with the exception of police body armor and ballistic helmets, which are the topic of individual NIJ performance stan
More
This NIJ 0108 Ⅲ class standard is applicable to all ballistic resistant materials (armor) intended to provide protection against gunfire, with the exception of police body armor and ballistic helmets, which are the topic of individual NIJ performance stan
More
EN 1063 standard applies to attack by handguns, rifles and shotguns and glazing in buildings for interior and exterior use: Handgun classes are EN 1063 BR2, EN 1063 BR3 and EN 1063 BR4, Rifle specifications are EN 1063 BR1, EN 1063 BR5, EN 1063 BR6 and EN
More
EN 1063 BR6 class is a safety glass standard established by the European Commission to measure the protective strength of bulletproof glass. EN 1063 BR6 class is usually used in conjunction with EN 1522 (standard for the resistance of windows, doors, shut
More
EN 1063, also known as CEN 1063, EN1063 BR5 class is a safety glass standard established by the European Commission to measure the protective strength of bulletproof glass. EN1063 BR5 class is usually used in conjunction with en 1522 (standard for the res
More
Ramor 600 is an ultra-high hardness bulletproof steel, which can provide 3-6 mm (0.118-0.236 ") thick plates with a nominal hardness of 600 HBW. Ramor 600 is available in 3-6 mm (0.118-0.236 ") thick, delivered in quenched condition without further heat
More
Ramor 550 steel is an ultra-high hardness bulletproof steel, which can provide 3-15 mm (0.118-0.591 ") thick plates with delivery hardness of 540-600 HBW. Ramor 550 steel is available in 3-6 mm (0.118-0.236 ") thick plates and 6-15 mm (0.236-0.591") th
More
Ramor 500 is a high hardness bulletproof steel, which can provide plate thickness of 2-30 mm (0.079-1.18 ") and deliver hardness of 490-560 HBW. Ramor 500 is available in 2-6.5 mm (0.079-0.256 ") thick plates and 6-30 mm (0.236-1.18") thick plates. Ram
More
Ramor 450 steel is a medium hardness bulletproof steel, which has both bulletproof function and impact toughness. Ramor 450 steel is available in 8-16 mm (0.315-0.630 ") thick plates with delivered hardness of 400-480 HBW. Ramor 450 steel does not requir
More
The anti explosion steel Ramor 400 is an explosion-proof medium hardness steel, which can provide plate thickness of 2-30 mm (0.078-1.18 ") and the delivered hardness is 360-460 HBW. Ramor 400 can provide 2-12 mm (0.078-0.472 ") thickness fixed length s
More
The Ramor 300 is a low alloy bulletproof steel plate that provides 3-6 mm (0.118-0.236") sheet with a hardness of 260-320 HBW. The Ramor 300 does not require further heat treatment. Ramor 300 size range: 3.0-6.0mm thickness of open cutting sheet.
More
The EN1522 FB7 class/ BR7 window detailed on this page below is specifically tested to EN 1063 BR7 and EN1522 FB7 class, withstanding multiple impacts from a 7.62 x 51 calibre weapon, a Rifle (AP). As you can see from the table below there are many compar
More
Our company manufacture EN 1522 FB5, EN1522 FB6 class and EN 1063 BR5 and BR6 Ballistic Windows to suit your specific requirements. Our Bullet Windows have been independently tested and certified within the UK to both EN1522 FB5 and EN1522 FB6 class with
More
Since the end of 1998, the new Euro Standard EN1522 FB5 class has been applied Europe-wide and replaces all standards that have been valid in these countries so far. The EN1522 FB5 class applies to all bulletproof doors, windows, shutters, transfer trays
More
Weldability of BP600 bulletproof steel plate: the carbon equivalent of BP600 bulletproof steel plate is between 0.50 and 0.62, which indicates that the steel has good weldability. The BP600 bulletproof steel plate heat input during welding is about 1.5-2.
More
Weldability of BP500 bulletproof steel plate: the carbon equivalent of BP500 bulletproof steel plate is between 0.50 and 0.62, which indicates that the steel has good weldability. The BP500 bulletproof steel plate heat input during welding is about 1.5-2.
More
The BP440 steel sheet can be heat treated. It has excellent gun resistance, strong impact resistance, uniform and stable performance, good shape and surface quality. This BP440 steel sheet is suitable for cash carriers, armored personnel carriers, escort
More
BP370 steel plate is heat treated with hot rolled coil as base plate. BP370 steel has excellent gun resistance, strong destructive impact resistance, uniform and stable performance, good shape and surface quality.
More
BP370 steel plate is heat treated with hot rolled coil as base plate. BP370 steel has excellent gun resistance, strong destructive impact resistance, uniform and stable performance, good shape and surface quality.
More