Email: [email protected]
Hotline: 0086-371-86151827
All steel pipes operated by our company are in compliance with national standards, and the original bill of materials of steel mills is attached. At the same time, we supply the BP440 steel with high quality seamless steel pipe, electrical Resistance Weld pipes, large diameter welded pipes ordering business of various specifications and materials and the railway and road transportation business for the majority of users.
Z-direction steel refers to thick steel with good tensile resistance in thickness direction. In the application of steel plate, the reason for additional performance requirements on the thickness direction of steel is due to the existence of defects in the thickness direction of steel in the process of casting and rolling. This defect makes the steel prone to lamellar tearing during welding, which reduces or even loses the design bearing capacity of application. The Z-direction performance is required for BP440 steel with high quality and so on steel plate with the tensile force along the plate thickness direction greater than or equal to 40mm.
BP440 steel with high quality, 30CrNi3MoV (code 675), 30CrMnMoRE (code 603) and 30CrNi2MnMoRE (code 617) are steel plates for armored vehicles. 30CrNi3MoV steel is developed by V Microalloying on the basis of the original Cr Ni Mo low alloy ultra high strength steel and adjusting the content of other alloying elements. 30CrNi3MoV high strength steel is a special refractory material for a certain weapon type. The milling performance of 30CrNi3MoV steel is poor.
We can process the steel materials according to your drawing. Or if you can not make drawing, please send us BP440 steel with high quality specific data and requirements, our technical department can make design and drawing for you, and then confirm with your technician or engineer. If all is OK, our processing center will process the steel materials according to the drawing. So no matter what size and shapes you need, we can meet demands at the most time.
Pre:Structural bp440 plate armored car good machining property
Threat STANAG 4569 1 class (Infantry Rifles, 5.56/7.62 Ball) Artillery Simulator: 20mm FSP (simulating 155mm threat) at 520 m/sec from a distance of 100 meters (7,273J). Due to very low probability of a large fragment retaining enough velocity at these d
More
This NIJ 0108 Ⅳ class standard is applicable to all ballistic resistant materials (armor) intended to provide protection against gunfire, with the exception of police body armor and ballistic helmets, which are the topic of individual NIJ performance stan
More
This NIJ 0108 Ⅲ class standard is applicable to all ballistic resistant materials (armor) intended to provide protection against gunfire, with the exception of police body armor and ballistic helmets, which are the topic of individual NIJ performance stan
More
EN 1063 standard applies to attack by handguns, rifles and shotguns and glazing in buildings for interior and exterior use: Handgun classes are EN 1063 BR2, EN 1063 BR3 and EN 1063 BR4, Rifle specifications are EN 1063 BR1, EN 1063 BR5, EN 1063 BR6 and EN
More
EN 1063 BR6 class is a safety glass standard established by the European Commission to measure the protective strength of bulletproof glass. EN 1063 BR6 class is usually used in conjunction with EN 1522 (standard for the resistance of windows, doors, shut
More
EN 1063, also known as CEN 1063, EN1063 BR5 class is a safety glass standard established by the European Commission to measure the protective strength of bulletproof glass. EN1063 BR5 class is usually used in conjunction with en 1522 (standard for the res
More
Ramor 600 is an ultra-high hardness bulletproof steel, which can provide 3-6 mm (0.118-0.236 ") thick plates with a nominal hardness of 600 HBW. Ramor 600 is available in 3-6 mm (0.118-0.236 ") thick, delivered in quenched condition without further heat
More
Ramor 550 steel is an ultra-high hardness bulletproof steel, which can provide 3-15 mm (0.118-0.591 ") thick plates with delivery hardness of 540-600 HBW. Ramor 550 steel is available in 3-6 mm (0.118-0.236 ") thick plates and 6-15 mm (0.236-0.591") th
More
Ramor 500 is a high hardness bulletproof steel, which can provide plate thickness of 2-30 mm (0.079-1.18 ") and deliver hardness of 490-560 HBW. Ramor 500 is available in 2-6.5 mm (0.079-0.256 ") thick plates and 6-30 mm (0.236-1.18") thick plates. Ram
More
Ramor 450 steel is a medium hardness bulletproof steel, which has both bulletproof function and impact toughness. Ramor 450 steel is available in 8-16 mm (0.315-0.630 ") thick plates with delivered hardness of 400-480 HBW. Ramor 450 steel does not requir
More
The anti explosion steel Ramor 400 is an explosion-proof medium hardness steel, which can provide plate thickness of 2-30 mm (0.078-1.18 ") and the delivered hardness is 360-460 HBW. Ramor 400 can provide 2-12 mm (0.078-0.472 ") thickness fixed length s
More
The Ramor 300 is a low alloy bulletproof steel plate that provides 3-6 mm (0.118-0.236") sheet with a hardness of 260-320 HBW. The Ramor 300 does not require further heat treatment. Ramor 300 size range: 3.0-6.0mm thickness of open cutting sheet.
More
The EN1522 FB7 class/ BR7 window detailed on this page below is specifically tested to EN 1063 BR7 and EN1522 FB7 class, withstanding multiple impacts from a 7.62 x 51 calibre weapon, a Rifle (AP). As you can see from the table below there are many compar
More
Our company manufacture EN 1522 FB5, EN1522 FB6 class and EN 1063 BR5 and BR6 Ballistic Windows to suit your specific requirements. Our Bullet Windows have been independently tested and certified within the UK to both EN1522 FB5 and EN1522 FB6 class with
More
Since the end of 1998, the new Euro Standard EN1522 FB5 class has been applied Europe-wide and replaces all standards that have been valid in these countries so far. The EN1522 FB5 class applies to all bulletproof doors, windows, shutters, transfer trays
More
Weldability of BP600 bulletproof steel plate: the carbon equivalent of BP600 bulletproof steel plate is between 0.50 and 0.62, which indicates that the steel has good weldability. The BP600 bulletproof steel plate heat input during welding is about 1.5-2.
More
Weldability of BP500 bulletproof steel plate: the carbon equivalent of BP500 bulletproof steel plate is between 0.50 and 0.62, which indicates that the steel has good weldability. The BP500 bulletproof steel plate heat input during welding is about 1.5-2.
More
The BP440 steel sheet can be heat treated. It has excellent gun resistance, strong impact resistance, uniform and stable performance, good shape and surface quality. This BP440 steel sheet is suitable for cash carriers, armored personnel carriers, escort
More
BP370 steel plate is heat treated with hot rolled coil as base plate. BP370 steel has excellent gun resistance, strong destructive impact resistance, uniform and stable performance, good shape and surface quality.
More
BP370 steel plate is heat treated with hot rolled coil as base plate. BP370 steel has excellent gun resistance, strong destructive impact resistance, uniform and stable performance, good shape and surface quality.
More