Email: [email protected]
Hotline: 0086-371-86151827
The company has allocated special environmental protection facilities for all BP300 bulletproof application pollution sources, strengthened the recycling of waste resources and improved the efficiency of resource utilization. At present, the recovery and utilization rate of solid wastes such as iron slag, steel slag, iron bearing dust, BP300 bulletproof application steel mill scale, environmental protection dust has reached 100%.
About the steel plate cutting process, its core is to determine the focus position, because the essence of laser cutting is to use the focusing mirror to focus the laser beam into a small focus, using the focus of high energy to achieve the purpose of BP300 bulletproof application steel plate melting vaporization and cutting. Therefore, if the focus is not well positioned, it will directly affect the quality of steel plate cutting.
Why can't stainless steel be flame cut? Flame cutting actually uses high-pressure oxygen flow to incinerate the metal and cut the metal. However, stainless steel has a high melting point and poor thermal conductivity. Under the influence of the temperature of the preheating flame, when flame cutting stainless steel, the stainless steel has a very thin oxide film on the surface of the stainless steel, which is called a high melting point. The high-viscosity chromium trioxide covers the surface of the stainless steel and prevents the next layer of metal from burning, so it cannot be cut normally.
BP300 bulletproof application, 30CrMnMoRE (603) is a high-strength and high-toughness steel plate that belongs to military steel. 603 is the steel plate code. 30CrMnMoRE is used to make pressure-resistant shells, deep-submersible lifesavers, high-voltage structural parts, aerospace equipment, armored vehicles, etc. 30CrMnMoRE steel plate is delivered in high temperature tempered state.
Pre:Analysis on price trend of later BP300 used for armored car market
NextWhat are the top ten high quality BP300 bulletproof steel hot rolled plates mills in Bangladesh
Threat STANAG 4569 1 class (Infantry Rifles, 5.56/7.62 Ball) Artillery Simulator: 20mm FSP (simulating 155mm threat) at 520 m/sec from a distance of 100 meters (7,273J). Due to very low probability of a large fragment retaining enough velocity at these d
More
This NIJ 0108 Ⅳ class standard is applicable to all ballistic resistant materials (armor) intended to provide protection against gunfire, with the exception of police body armor and ballistic helmets, which are the topic of individual NIJ performance stan
More
This NIJ 0108 Ⅲ class standard is applicable to all ballistic resistant materials (armor) intended to provide protection against gunfire, with the exception of police body armor and ballistic helmets, which are the topic of individual NIJ performance stan
More
EN 1063 standard applies to attack by handguns, rifles and shotguns and glazing in buildings for interior and exterior use: Handgun classes are EN 1063 BR2, EN 1063 BR3 and EN 1063 BR4, Rifle specifications are EN 1063 BR1, EN 1063 BR5, EN 1063 BR6 and EN
More
EN 1063 BR6 class is a safety glass standard established by the European Commission to measure the protective strength of bulletproof glass. EN 1063 BR6 class is usually used in conjunction with EN 1522 (standard for the resistance of windows, doors, shut
More
EN 1063, also known as CEN 1063, EN1063 BR5 class is a safety glass standard established by the European Commission to measure the protective strength of bulletproof glass. EN1063 BR5 class is usually used in conjunction with en 1522 (standard for the res
More
Ramor 600 is an ultra-high hardness bulletproof steel, which can provide 3-6 mm (0.118-0.236 ") thick plates with a nominal hardness of 600 HBW. Ramor 600 is available in 3-6 mm (0.118-0.236 ") thick, delivered in quenched condition without further heat
More
Ramor 550 steel is an ultra-high hardness bulletproof steel, which can provide 3-15 mm (0.118-0.591 ") thick plates with delivery hardness of 540-600 HBW. Ramor 550 steel is available in 3-6 mm (0.118-0.236 ") thick plates and 6-15 mm (0.236-0.591") th
More
Ramor 500 is a high hardness bulletproof steel, which can provide plate thickness of 2-30 mm (0.079-1.18 ") and deliver hardness of 490-560 HBW. Ramor 500 is available in 2-6.5 mm (0.079-0.256 ") thick plates and 6-30 mm (0.236-1.18") thick plates. Ram
More
Ramor 450 steel is a medium hardness bulletproof steel, which has both bulletproof function and impact toughness. Ramor 450 steel is available in 8-16 mm (0.315-0.630 ") thick plates with delivered hardness of 400-480 HBW. Ramor 450 steel does not requir
More
The anti explosion steel Ramor 400 is an explosion-proof medium hardness steel, which can provide plate thickness of 2-30 mm (0.078-1.18 ") and the delivered hardness is 360-460 HBW. Ramor 400 can provide 2-12 mm (0.078-0.472 ") thickness fixed length s
More
The Ramor 300 is a low alloy bulletproof steel plate that provides 3-6 mm (0.118-0.236") sheet with a hardness of 260-320 HBW. The Ramor 300 does not require further heat treatment. Ramor 300 size range: 3.0-6.0mm thickness of open cutting sheet.
More
The EN1522 FB7 class/ BR7 window detailed on this page below is specifically tested to EN 1063 BR7 and EN1522 FB7 class, withstanding multiple impacts from a 7.62 x 51 calibre weapon, a Rifle (AP). As you can see from the table below there are many compar
More
Our company manufacture EN 1522 FB5, EN1522 FB6 class and EN 1063 BR5 and BR6 Ballistic Windows to suit your specific requirements. Our Bullet Windows have been independently tested and certified within the UK to both EN1522 FB5 and EN1522 FB6 class with
More
Since the end of 1998, the new Euro Standard EN1522 FB5 class has been applied Europe-wide and replaces all standards that have been valid in these countries so far. The EN1522 FB5 class applies to all bulletproof doors, windows, shutters, transfer trays
More
Weldability of BP600 bulletproof steel plate: the carbon equivalent of BP600 bulletproof steel plate is between 0.50 and 0.62, which indicates that the steel has good weldability. The BP600 bulletproof steel plate heat input during welding is about 1.5-2.
More
Weldability of BP500 bulletproof steel plate: the carbon equivalent of BP500 bulletproof steel plate is between 0.50 and 0.62, which indicates that the steel has good weldability. The BP500 bulletproof steel plate heat input during welding is about 1.5-2.
More
The BP440 steel sheet can be heat treated. It has excellent gun resistance, strong impact resistance, uniform and stable performance, good shape and surface quality. This BP440 steel sheet is suitable for cash carriers, armored personnel carriers, escort
More
BP370 steel plate is heat treated with hot rolled coil as base plate. BP370 steel has excellent gun resistance, strong destructive impact resistance, uniform and stable performance, good shape and surface quality.
More
BP370 steel plate is heat treated with hot rolled coil as base plate. BP370 steel has excellent gun resistance, strong destructive impact resistance, uniform and stable performance, good shape and surface quality.
More