Email: [email protected]
Hotline: 0086-371-86151827
For the estimation in April and the second quarter, the estimation on March 16 is still valid, but the decrease in April is 10% higher than the neutral prediction. It is a conservative estimation based on 10% for the high probability event. In the second quarter, the output of overseas pig iron will be reduced by 11.67 million tons, affecting the demand for BP300 steel heat treatment iron ore of about 1.84 million tons; in the first half of the year, the output will be reduced by 18.899 million tons, affecting the demand for iron ore of 32.13 million tons.
Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the BP300 steel heat treatment project. In response process of customer service center, in case of technical support and after-sales service demand, the user shall contact the full-time engineer of BP300 steel heat treatment customer service center, and the technical personnel will give corresponding answers and on-site treatment according to the needs of users.
Q355NH steel plates and sheets with atmospheric corrosion resistance are mainly used for vehicles, bridges, containers, buildings, towers, and other structures. Weather-resistant steel can be used to make bolted, riveted and welded structural parts. We can also slit and sheet Q355NH (Equivalent A588 steel) to any weight and size for immediate delivery. Our BP300 steel heat treatment, Q355NH weathering steel plates are produced with thickness up to 100mm.
BP300 steel heat treatment, P355GH plate mechanical properties: P355GH steel plate thickness/mm:> 60-100: tensile strength σb / MPa: 490-630; yield strength σx / MPa:> = 315 Impact absorption energy AKv / J:> = 34. Steel plate thickness / mm:> 100-150: tensile strength σb / MPa: 480-630,y ield strength σx / MPa:> = 295 Impact absorption energy AKv / J:> = 34. Chemical composition % (C:0.10-0.22, Si:<=03.60, Mn:1.00-1.70, Nb:<=0.010, Ti:<=0.03 S:<=0.030, P:<=0.025, Cr:<=0.30, Ni:<=0.30, Cu:<=0.30, Mo:<=0.10, V <=0.02)
On March 17 th 2018, our Sudan customer purchased the SG295 cylinder steel coils through other country such as UAE,Turkey before they cooperate with us. After they research our regular customer in Uganda, UAE, and his friends in China, he is satisfied with our company. Our produced SG295 cylinder steel is mainly used to fabricate low temperature pressure vessels like gas cylinder. The customer is very satisfied to our BP300 steel heat treatment quality control and professional arrangement for the SG295 steel order.
our company is a professional ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates steel exporter and a steel Stockist in china. We keep more than BP300 steel heat treatment 1000 tons ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates steel in stock every month.
Pre:Hot rolled bp300 steel impact energy yield strength value
Threat STANAG 4569 1 class (Infantry Rifles, 5.56/7.62 Ball) Artillery Simulator: 20mm FSP (simulating 155mm threat) at 520 m/sec from a distance of 100 meters (7,273J). Due to very low probability of a large fragment retaining enough velocity at these d
More
This NIJ 0108 Ⅳ class standard is applicable to all ballistic resistant materials (armor) intended to provide protection against gunfire, with the exception of police body armor and ballistic helmets, which are the topic of individual NIJ performance stan
More
This NIJ 0108 Ⅲ class standard is applicable to all ballistic resistant materials (armor) intended to provide protection against gunfire, with the exception of police body armor and ballistic helmets, which are the topic of individual NIJ performance stan
More
EN 1063 standard applies to attack by handguns, rifles and shotguns and glazing in buildings for interior and exterior use: Handgun classes are EN 1063 BR2, EN 1063 BR3 and EN 1063 BR4, Rifle specifications are EN 1063 BR1, EN 1063 BR5, EN 1063 BR6 and EN
More
EN 1063 BR6 class is a safety glass standard established by the European Commission to measure the protective strength of bulletproof glass. EN 1063 BR6 class is usually used in conjunction with EN 1522 (standard for the resistance of windows, doors, shut
More
EN 1063, also known as CEN 1063, EN1063 BR5 class is a safety glass standard established by the European Commission to measure the protective strength of bulletproof glass. EN1063 BR5 class is usually used in conjunction with en 1522 (standard for the res
More
Ramor 600 is an ultra-high hardness bulletproof steel, which can provide 3-6 mm (0.118-0.236 ") thick plates with a nominal hardness of 600 HBW. Ramor 600 is available in 3-6 mm (0.118-0.236 ") thick, delivered in quenched condition without further heat
More
Ramor 550 steel is an ultra-high hardness bulletproof steel, which can provide 3-15 mm (0.118-0.591 ") thick plates with delivery hardness of 540-600 HBW. Ramor 550 steel is available in 3-6 mm (0.118-0.236 ") thick plates and 6-15 mm (0.236-0.591") th
More
Ramor 500 is a high hardness bulletproof steel, which can provide plate thickness of 2-30 mm (0.079-1.18 ") and deliver hardness of 490-560 HBW. Ramor 500 is available in 2-6.5 mm (0.079-0.256 ") thick plates and 6-30 mm (0.236-1.18") thick plates. Ram
More
Ramor 450 steel is a medium hardness bulletproof steel, which has both bulletproof function and impact toughness. Ramor 450 steel is available in 8-16 mm (0.315-0.630 ") thick plates with delivered hardness of 400-480 HBW. Ramor 450 steel does not requir
More
The anti explosion steel Ramor 400 is an explosion-proof medium hardness steel, which can provide plate thickness of 2-30 mm (0.078-1.18 ") and the delivered hardness is 360-460 HBW. Ramor 400 can provide 2-12 mm (0.078-0.472 ") thickness fixed length s
More
The Ramor 300 is a low alloy bulletproof steel plate that provides 3-6 mm (0.118-0.236") sheet with a hardness of 260-320 HBW. The Ramor 300 does not require further heat treatment. Ramor 300 size range: 3.0-6.0mm thickness of open cutting sheet.
More
The EN1522 FB7 class/ BR7 window detailed on this page below is specifically tested to EN 1063 BR7 and EN1522 FB7 class, withstanding multiple impacts from a 7.62 x 51 calibre weapon, a Rifle (AP). As you can see from the table below there are many compar
More
Our company manufacture EN 1522 FB5, EN1522 FB6 class and EN 1063 BR5 and BR6 Ballistic Windows to suit your specific requirements. Our Bullet Windows have been independently tested and certified within the UK to both EN1522 FB5 and EN1522 FB6 class with
More
Since the end of 1998, the new Euro Standard EN1522 FB5 class has been applied Europe-wide and replaces all standards that have been valid in these countries so far. The EN1522 FB5 class applies to all bulletproof doors, windows, shutters, transfer trays
More
Weldability of BP600 bulletproof steel plate: the carbon equivalent of BP600 bulletproof steel plate is between 0.50 and 0.62, which indicates that the steel has good weldability. The BP600 bulletproof steel plate heat input during welding is about 1.5-2.
More
Weldability of BP500 bulletproof steel plate: the carbon equivalent of BP500 bulletproof steel plate is between 0.50 and 0.62, which indicates that the steel has good weldability. The BP500 bulletproof steel plate heat input during welding is about 1.5-2.
More
The BP440 steel sheet can be heat treated. It has excellent gun resistance, strong impact resistance, uniform and stable performance, good shape and surface quality. This BP440 steel sheet is suitable for cash carriers, armored personnel carriers, escort
More
BP370 steel plate is heat treated with hot rolled coil as base plate. BP370 steel has excellent gun resistance, strong destructive impact resistance, uniform and stable performance, good shape and surface quality.
More
BP370 steel plate is heat treated with hot rolled coil as base plate. BP370 steel has excellent gun resistance, strong destructive impact resistance, uniform and stable performance, good shape and surface quality.
More