Email: [email protected]
Hotline: 0086-371-86151827
Bearing on FoundationsFoundations shall preferably be designed to resist the load exerted by the API Standard 620 tank and its contents when the tank is filled with water to the design liquid level. Foundations shall be designed at least for the maximum operating conditions including the wind load. During the BP500 steel mechanical property water test, the total load on the foundation shall not exceed 125% of the allowable loading. If necessary, the water level during the test may be reduced below the design liquid level line so as not to exceed the 25% maximum overload (see Q.8.1.2).
The company has passed the ISO9001: 2008 quality system certification, strictly implemented the ISO9001 quality management system. Besides, we have continuously improved the after-sales service network to make every effort to provide more convenient, accurate and faster services for all customers. We will supervise the production, control the quality in the factory, Inspect the cargo before shipment, Issue the test report to sales department. From the steel prodcution to steel delivery, we always focus the whole process.
BP500 steel mechanical property weld tightness test: remove dirt from the BP500 steel mechanical property weld, apply white powder emulsion, spray kerosene on the other side of the weld after drying. Because of the strong penetration of kerosene, if kerosene is sprayed after 12 hours (under low temperature conditions, the time can be extended), if the surface of the welded seam coated with white emulsion has no spots, the welded seam meets the requirements.
[Enterprise Spirit]: professional, honest, dedicated and innovative.[Enterprise Tenet]: provide customers with satisfactory steel products and services.[Enterprise Policy]: customer satisfaction is our pursuit. The trust of customers is our achievement.[Service Tenet]: to develop the market with quality and grow with sincerity.The company adheres to the commitment of quality first and customer foremost, takes high quality and high efficiency as the service principle, takes mutual benefit and common development as the business purpose.
Pre:High strength bp500 bulletproof plate price with 5500mm length
Threat STANAG 4569 1 class (Infantry Rifles, 5.56/7.62 Ball) Artillery Simulator: 20mm FSP (simulating 155mm threat) at 520 m/sec from a distance of 100 meters (7,273J). Due to very low probability of a large fragment retaining enough velocity at these d
More
This NIJ 0108 Ⅳ class standard is applicable to all ballistic resistant materials (armor) intended to provide protection against gunfire, with the exception of police body armor and ballistic helmets, which are the topic of individual NIJ performance stan
More
This NIJ 0108 Ⅲ class standard is applicable to all ballistic resistant materials (armor) intended to provide protection against gunfire, with the exception of police body armor and ballistic helmets, which are the topic of individual NIJ performance stan
More
EN 1063 standard applies to attack by handguns, rifles and shotguns and glazing in buildings for interior and exterior use: Handgun classes are EN 1063 BR2, EN 1063 BR3 and EN 1063 BR4, Rifle specifications are EN 1063 BR1, EN 1063 BR5, EN 1063 BR6 and EN
More
EN 1063 BR6 class is a safety glass standard established by the European Commission to measure the protective strength of bulletproof glass. EN 1063 BR6 class is usually used in conjunction with EN 1522 (standard for the resistance of windows, doors, shut
More
EN 1063, also known as CEN 1063, EN1063 BR5 class is a safety glass standard established by the European Commission to measure the protective strength of bulletproof glass. EN1063 BR5 class is usually used in conjunction with en 1522 (standard for the res
More
Ramor 600 is an ultra-high hardness bulletproof steel, which can provide 3-6 mm (0.118-0.236 ") thick plates with a nominal hardness of 600 HBW. Ramor 600 is available in 3-6 mm (0.118-0.236 ") thick, delivered in quenched condition without further heat
More
Ramor 550 steel is an ultra-high hardness bulletproof steel, which can provide 3-15 mm (0.118-0.591 ") thick plates with delivery hardness of 540-600 HBW. Ramor 550 steel is available in 3-6 mm (0.118-0.236 ") thick plates and 6-15 mm (0.236-0.591") th
More
Ramor 500 is a high hardness bulletproof steel, which can provide plate thickness of 2-30 mm (0.079-1.18 ") and deliver hardness of 490-560 HBW. Ramor 500 is available in 2-6.5 mm (0.079-0.256 ") thick plates and 6-30 mm (0.236-1.18") thick plates. Ram
More
Ramor 450 steel is a medium hardness bulletproof steel, which has both bulletproof function and impact toughness. Ramor 450 steel is available in 8-16 mm (0.315-0.630 ") thick plates with delivered hardness of 400-480 HBW. Ramor 450 steel does not requir
More
The anti explosion steel Ramor 400 is an explosion-proof medium hardness steel, which can provide plate thickness of 2-30 mm (0.078-1.18 ") and the delivered hardness is 360-460 HBW. Ramor 400 can provide 2-12 mm (0.078-0.472 ") thickness fixed length s
More
The Ramor 300 is a low alloy bulletproof steel plate that provides 3-6 mm (0.118-0.236") sheet with a hardness of 260-320 HBW. The Ramor 300 does not require further heat treatment. Ramor 300 size range: 3.0-6.0mm thickness of open cutting sheet.
More
The EN1522 FB7 class/ BR7 window detailed on this page below is specifically tested to EN 1063 BR7 and EN1522 FB7 class, withstanding multiple impacts from a 7.62 x 51 calibre weapon, a Rifle (AP). As you can see from the table below there are many compar
More
Our company manufacture EN 1522 FB5, EN1522 FB6 class and EN 1063 BR5 and BR6 Ballistic Windows to suit your specific requirements. Our Bullet Windows have been independently tested and certified within the UK to both EN1522 FB5 and EN1522 FB6 class with
More
Since the end of 1998, the new Euro Standard EN1522 FB5 class has been applied Europe-wide and replaces all standards that have been valid in these countries so far. The EN1522 FB5 class applies to all bulletproof doors, windows, shutters, transfer trays
More
Weldability of BP600 bulletproof steel plate: the carbon equivalent of BP600 bulletproof steel plate is between 0.50 and 0.62, which indicates that the steel has good weldability. The BP600 bulletproof steel plate heat input during welding is about 1.5-2.
More
Weldability of BP500 bulletproof steel plate: the carbon equivalent of BP500 bulletproof steel plate is between 0.50 and 0.62, which indicates that the steel has good weldability. The BP500 bulletproof steel plate heat input during welding is about 1.5-2.
More
The BP440 steel sheet can be heat treated. It has excellent gun resistance, strong impact resistance, uniform and stable performance, good shape and surface quality. This BP440 steel sheet is suitable for cash carriers, armored personnel carriers, escort
More
BP370 steel plate is heat treated with hot rolled coil as base plate. BP370 steel has excellent gun resistance, strong destructive impact resistance, uniform and stable performance, good shape and surface quality.
More
BP370 steel plate is heat treated with hot rolled coil as base plate. BP370 steel has excellent gun resistance, strong destructive impact resistance, uniform and stable performance, good shape and surface quality.
More