Surface heat treatment methods for BP500 bulletproof material

Myanmar's demand for BP500 bulletproof material steel products is likely to exceed 3 million tons in 2020 and 5 million tons by 2025, according to seaisi. However, Myanmar's producers are unable to meet domestic demand, so the country's steel products are more dependent on imports. In 2019, Myanmar imported more than 1.9 million tons of BP500 bulletproof material finished steel, including 57% of long products, 13% of uncoated hot-rolled and cold-rolled flat products, and 30% of coated steel. In order to reduce its dependence on imports, Myanmar plans to increase its steel production capacity by building and expanding steel mills.

It is very important for an enterprise to have a sound after-sales service system, which not only ensures the normal outflow and inflow of the company's products, but also improves the trust of the company's products in the hearts of customers. Our company has a special after-sales service team and good after-sales service reputation. In case of any problem in the use of our steel products BP500 bulletproof material , whether quality problem or not, the after-sales service department will assist in solving the problem as soon as possible, and regularly consult and track the use of the steel products.

Q345R steel (16MnR) is a low-alloy high-strength steel. It is a special plate for pressure vessels with a yield strength of 340MPa min. Q345R plate has good comprehensive mechanical properties and technological properties. The phosphorus and sulfur contents are slightly lower than the low-alloy high-strength steel plate Q345 steel (16MnR). In addition to the increased tensile strength and elongation requirements compared to Q345B steel, BP500 bulletproof material, the impact toughness is also required.

Chemical composition of 12Cr1MoV alloy steel plate: Carbon C: 0.08-0.15; Silicon Si: 0.17-0.37; Manganese Mn: 0.40-0.70; Sulfur S: allowable residual content ≤ 0.035; Phosphorus P: allowable residual content ≤ 0.035; Chromium Cr: 0.90-1.20; Nickel Ni: allowable residual content ≤ 0.030; Cu: allowable residual content ≤ 0.030; V: 0.15-0.30; Mo: 0.25-0.30.Delivery status of BP500 bulletproof material, 12Cr1MoV alloy steel plate: delivered in heat treatment (normalizing, annealing or high temperature tempering) or non heat treatment status, and the delivery status shall be indicated in the contract.

In November of 2015, Thailand one company contacted with us from Internet. They are find the trustable supplier of S355J2H seamless pipe BP500 bulletproof material for there cable car supporter. Due to the special using of the pipes, they are very careful and servious when choosing the supplier. After one months contact and discussion by email, they come to our company. We drive to the pipe mill for visit of 2 days. Through this visit, they are very confident with our production ability and proucts quality. Finally, they accept the grade we suggest Q345D. After back to office, they put the order of 1400 tons pipe to us directly.

The strip steel thickness is generally below 6mm, which is convenient for crimping and processing. You should choose the BP500 bulletproof material, strip steel specifications according to your own purposes. The specifications and materials used for different purposes are different, so you must confirm it before buying. It is best to ask professionals to give advice before purchasing strip steel, and purchase the specifications and types you need according to the corresponding requirements.

Pre:Welding grade BP500 steel mechanical property steel supplier

NextPrime bp440 steel with high quality corrugated steel roofing sheet