Email: [email protected]
Hotline: 0086-371-86151827
We have very professional workshops for thin plates/ coils, Ramor 300 bulletproof steel, medium and general thick plates. And also special workshop to produce thick plates that thickness is more than 300mm. we produce the steel plate include carbon and low alloy high strength steel plate, shipbuilding and offshore platform steel plate, boiler and pressure vessel steel plate, weather resistant steel plate, pipeline steel plate, alloy steel plate, automobile structure steel plate, and gas cylinder steel coil etc.
Laser cutting Ramor 300 bulletproof steel has no burr, wrinkle and precision is high. It is superior to plasma cutting. Laser cutting has good cutting quality, narrow cutting width (generally 0.1-0.5m m), high accuracy (generally 0.1-0.4mm hole center distance error, 0.1-0.5mm contour dimension error), good surface roughness (generally Ra is 12.5-25μm), and the Ramor 300 bulletproof steel cutting seam can be welded without further processing. Fast cutting speed: for example, with 2kW laser power, the cutting speed of 8mm thick carbon steel is 1.6m/min.
30CrNi3MoV(675) plate is a high-strength and high-toughness steel plate. The main mechanical properties of 30CrNi3MoV high-strength steel are: hardness HRC40-42, tensile strength 1280MPa. Ramor 300 bulletproof steel, 30CrNi3MoV high-strength steel is a special difficult-to-machine material for a certain weapon model, and the milling performance of 30CrNi3MoV steel is poor.
Flat steel is a kind of steel with rectangular cross-section and blunt edges at the edges and corners. It is usually 12-300 mm wide and 3-60 mm thick. Compared with Ramor 300 bulletproof steel ordinary steel plate, the utilization rate of flat steel is increased by one to five percentage points. Moreover, flat steel can be produced with fixed thickness, width and length according to the user's requirements, which saves the cutting process for users, reduces the consumption of labor and materials, and also reduces the processing loss of raw materials, saving time, labor and material.
Pre:The weekend price forecast of Ramor 300 steel plate for helmet
NextThe bulletproof Ramor 300 plate price forecast this week in China
Threat STANAG 4569 1 class (Infantry Rifles, 5.56/7.62 Ball) Artillery Simulator: 20mm FSP (simulating 155mm threat) at 520 m/sec from a distance of 100 meters (7,273J). Due to very low probability of a large fragment retaining enough velocity at these d
More
This NIJ 0108 Ⅳ class standard is applicable to all ballistic resistant materials (armor) intended to provide protection against gunfire, with the exception of police body armor and ballistic helmets, which are the topic of individual NIJ performance stan
More
This NIJ 0108 Ⅲ class standard is applicable to all ballistic resistant materials (armor) intended to provide protection against gunfire, with the exception of police body armor and ballistic helmets, which are the topic of individual NIJ performance stan
More
EN 1063 standard applies to attack by handguns, rifles and shotguns and glazing in buildings for interior and exterior use: Handgun classes are EN 1063 BR2, EN 1063 BR3 and EN 1063 BR4, Rifle specifications are EN 1063 BR1, EN 1063 BR5, EN 1063 BR6 and EN
More
EN 1063 BR6 class is a safety glass standard established by the European Commission to measure the protective strength of bulletproof glass. EN 1063 BR6 class is usually used in conjunction with EN 1522 (standard for the resistance of windows, doors, shut
More
EN 1063, also known as CEN 1063, EN1063 BR5 class is a safety glass standard established by the European Commission to measure the protective strength of bulletproof glass. EN1063 BR5 class is usually used in conjunction with en 1522 (standard for the res
More
Ramor 600 is an ultra-high hardness bulletproof steel, which can provide 3-6 mm (0.118-0.236 ") thick plates with a nominal hardness of 600 HBW. Ramor 600 is available in 3-6 mm (0.118-0.236 ") thick, delivered in quenched condition without further heat
More
Ramor 550 steel is an ultra-high hardness bulletproof steel, which can provide 3-15 mm (0.118-0.591 ") thick plates with delivery hardness of 540-600 HBW. Ramor 550 steel is available in 3-6 mm (0.118-0.236 ") thick plates and 6-15 mm (0.236-0.591") th
More
Ramor 500 is a high hardness bulletproof steel, which can provide plate thickness of 2-30 mm (0.079-1.18 ") and deliver hardness of 490-560 HBW. Ramor 500 is available in 2-6.5 mm (0.079-0.256 ") thick plates and 6-30 mm (0.236-1.18") thick plates. Ram
More
Ramor 450 steel is a medium hardness bulletproof steel, which has both bulletproof function and impact toughness. Ramor 450 steel is available in 8-16 mm (0.315-0.630 ") thick plates with delivered hardness of 400-480 HBW. Ramor 450 steel does not requir
More
The anti explosion steel Ramor 400 is an explosion-proof medium hardness steel, which can provide plate thickness of 2-30 mm (0.078-1.18 ") and the delivered hardness is 360-460 HBW. Ramor 400 can provide 2-12 mm (0.078-0.472 ") thickness fixed length s
More
The Ramor 300 is a low alloy bulletproof steel plate that provides 3-6 mm (0.118-0.236") sheet with a hardness of 260-320 HBW. The Ramor 300 does not require further heat treatment. Ramor 300 size range: 3.0-6.0mm thickness of open cutting sheet.
More
The EN1522 FB7 class/ BR7 window detailed on this page below is specifically tested to EN 1063 BR7 and EN1522 FB7 class, withstanding multiple impacts from a 7.62 x 51 calibre weapon, a Rifle (AP). As you can see from the table below there are many compar
More
Our company manufacture EN 1522 FB5, EN1522 FB6 class and EN 1063 BR5 and BR6 Ballistic Windows to suit your specific requirements. Our Bullet Windows have been independently tested and certified within the UK to both EN1522 FB5 and EN1522 FB6 class with
More
Since the end of 1998, the new Euro Standard EN1522 FB5 class has been applied Europe-wide and replaces all standards that have been valid in these countries so far. The EN1522 FB5 class applies to all bulletproof doors, windows, shutters, transfer trays
More
Weldability of BP600 bulletproof steel plate: the carbon equivalent of BP600 bulletproof steel plate is between 0.50 and 0.62, which indicates that the steel has good weldability. The BP600 bulletproof steel plate heat input during welding is about 1.5-2.
More
Weldability of BP500 bulletproof steel plate: the carbon equivalent of BP500 bulletproof steel plate is between 0.50 and 0.62, which indicates that the steel has good weldability. The BP500 bulletproof steel plate heat input during welding is about 1.5-2.
More
The BP440 steel sheet can be heat treated. It has excellent gun resistance, strong impact resistance, uniform and stable performance, good shape and surface quality. This BP440 steel sheet is suitable for cash carriers, armored personnel carriers, escort
More
BP370 steel plate is heat treated with hot rolled coil as base plate. BP370 steel has excellent gun resistance, strong destructive impact resistance, uniform and stable performance, good shape and surface quality.
More
BP370 steel plate is heat treated with hot rolled coil as base plate. BP370 steel has excellent gun resistance, strong destructive impact resistance, uniform and stable performance, good shape and surface quality.
More