Email: [email protected]
Hotline: 0086-371-86151827
The company has strict control on the quality of Ramor 300 bulletproof steel width. Each Ramor 300 bulletproof steel width is inspected for the whole process, including raw material purchase, production process according to the procedures and relevant regulations. According to the technical standards and technical requirements, the composite quality inspection is carried out to confirm whether the Ramor 300 bulletproof steel width meets the specified quality requirements.
Normalizing is a special case of annealing, the effect is similar to annealing, but the microstructure obtained by normalizing is finer. For low or medium carbon steel, normalizing can improve hardness and machinability. For Ramor 300 bulletproof steel width medium carbon steel and low alloy steel, normalizing can refine grain and uniform structure and reduce hardness. For high carbon steel and high alloy steel, normalizing can eliminate the network carbide produced by forging and improve the homogeneity of the preparation heat treatment structure.
"Ramor 300 bulletproof steel width and 30CrNi3MoV steel are armor bulletproof steel.Chemical composition of 30CrNi3MoV (675) armor bulletproof steel:C: 0.26-0.32, Si: 0.15-0.35, Mn: 0.30-0.50, P:≤0.015, S:≤0.010, Cr: 0.60-1.00, Ni: 2.80-3.20, Mo: 0.40-0.50, Re: 0.06-0.13, V: 0.06-0.013.Heat treatment of 30CrNi3MoV (675) armor bulletproof steel:Quenching: 870 - 910℃, 2 - 3min / mm, water cooling.Tempering: 580-620℃, 3-5min / mm, water cooling."
Compared with the traditional seamless steel pipe, alloy seamless pipe has better performance in all aspects. Because of the addition of various metal elements in the manufacturing, the overall strength of the alloy seamless pipe is larger, stronger and durable, and the service performance and service life of the Ramor 300 bulletproof steel width, alloy seamless pipe are improved. The alloy seamless pipe is the best choice especially for special environment and high pressure requirements. Because of its high material properties, alloy seamless pipe has good corrosion resistance. It is not easy to be corroded in some special environment, which reduces the cost of the project and has a longer service life.
Pre:Low price Ramor 300 bulletproof steel length for sale
NextBBN STEEL exported Ramor 450 ballistic performance to Oman
Threat STANAG 4569 1 class (Infantry Rifles, 5.56/7.62 Ball) Artillery Simulator: 20mm FSP (simulating 155mm threat) at 520 m/sec from a distance of 100 meters (7,273J). Due to very low probability of a large fragment retaining enough velocity at these d
More
This NIJ 0108 Ⅳ class standard is applicable to all ballistic resistant materials (armor) intended to provide protection against gunfire, with the exception of police body armor and ballistic helmets, which are the topic of individual NIJ performance stan
More
This NIJ 0108 Ⅲ class standard is applicable to all ballistic resistant materials (armor) intended to provide protection against gunfire, with the exception of police body armor and ballistic helmets, which are the topic of individual NIJ performance stan
More
EN 1063 standard applies to attack by handguns, rifles and shotguns and glazing in buildings for interior and exterior use: Handgun classes are EN 1063 BR2, EN 1063 BR3 and EN 1063 BR4, Rifle specifications are EN 1063 BR1, EN 1063 BR5, EN 1063 BR6 and EN
More
EN 1063 BR6 class is a safety glass standard established by the European Commission to measure the protective strength of bulletproof glass. EN 1063 BR6 class is usually used in conjunction with EN 1522 (standard for the resistance of windows, doors, shut
More
EN 1063, also known as CEN 1063, EN1063 BR5 class is a safety glass standard established by the European Commission to measure the protective strength of bulletproof glass. EN1063 BR5 class is usually used in conjunction with en 1522 (standard for the res
More
Ramor 600 is an ultra-high hardness bulletproof steel, which can provide 3-6 mm (0.118-0.236 ") thick plates with a nominal hardness of 600 HBW. Ramor 600 is available in 3-6 mm (0.118-0.236 ") thick, delivered in quenched condition without further heat
More
Ramor 550 steel is an ultra-high hardness bulletproof steel, which can provide 3-15 mm (0.118-0.591 ") thick plates with delivery hardness of 540-600 HBW. Ramor 550 steel is available in 3-6 mm (0.118-0.236 ") thick plates and 6-15 mm (0.236-0.591") th
More
Ramor 500 is a high hardness bulletproof steel, which can provide plate thickness of 2-30 mm (0.079-1.18 ") and deliver hardness of 490-560 HBW. Ramor 500 is available in 2-6.5 mm (0.079-0.256 ") thick plates and 6-30 mm (0.236-1.18") thick plates. Ram
More
Ramor 450 steel is a medium hardness bulletproof steel, which has both bulletproof function and impact toughness. Ramor 450 steel is available in 8-16 mm (0.315-0.630 ") thick plates with delivered hardness of 400-480 HBW. Ramor 450 steel does not requir
More
The anti explosion steel Ramor 400 is an explosion-proof medium hardness steel, which can provide plate thickness of 2-30 mm (0.078-1.18 ") and the delivered hardness is 360-460 HBW. Ramor 400 can provide 2-12 mm (0.078-0.472 ") thickness fixed length s
More
The Ramor 300 is a low alloy bulletproof steel plate that provides 3-6 mm (0.118-0.236") sheet with a hardness of 260-320 HBW. The Ramor 300 does not require further heat treatment. Ramor 300 size range: 3.0-6.0mm thickness of open cutting sheet.
More
The EN1522 FB7 class/ BR7 window detailed on this page below is specifically tested to EN 1063 BR7 and EN1522 FB7 class, withstanding multiple impacts from a 7.62 x 51 calibre weapon, a Rifle (AP). As you can see from the table below there are many compar
More
Our company manufacture EN 1522 FB5, EN1522 FB6 class and EN 1063 BR5 and BR6 Ballistic Windows to suit your specific requirements. Our Bullet Windows have been independently tested and certified within the UK to both EN1522 FB5 and EN1522 FB6 class with
More
Since the end of 1998, the new Euro Standard EN1522 FB5 class has been applied Europe-wide and replaces all standards that have been valid in these countries so far. The EN1522 FB5 class applies to all bulletproof doors, windows, shutters, transfer trays
More
Weldability of BP600 bulletproof steel plate: the carbon equivalent of BP600 bulletproof steel plate is between 0.50 and 0.62, which indicates that the steel has good weldability. The BP600 bulletproof steel plate heat input during welding is about 1.5-2.
More
Weldability of BP500 bulletproof steel plate: the carbon equivalent of BP500 bulletproof steel plate is between 0.50 and 0.62, which indicates that the steel has good weldability. The BP500 bulletproof steel plate heat input during welding is about 1.5-2.
More
The BP440 steel sheet can be heat treated. It has excellent gun resistance, strong impact resistance, uniform and stable performance, good shape and surface quality. This BP440 steel sheet is suitable for cash carriers, armored personnel carriers, escort
More
BP370 steel plate is heat treated with hot rolled coil as base plate. BP370 steel has excellent gun resistance, strong destructive impact resistance, uniform and stable performance, good shape and surface quality.
More
BP370 steel plate is heat treated with hot rolled coil as base plate. BP370 steel has excellent gun resistance, strong destructive impact resistance, uniform and stable performance, good shape and surface quality.
More